PB 1/4-M5 | Push in Fitting - Male Stud Branch Tee | 1/4" O.D Tubing, M5 x 0.8 Male Thread
PB 1/4-M5 push in fitting male stud branch tee provides two opposing 1/4" O.D tubing connection with a M5 x 0.8 male thread at a 90-degree angle. 1/4" O.D tubing to M5 x 0.8 male branch tee push to connect fitting is made of nickel plated brass, strong thermoplastic (PBT), POM release sleeve and stainless steel tube gripping claw. 1/4" tubing to M5 x 0.8 male branch tee swivel pneumatic fitting has a NBR O-ring for sealing. Oval or round release ring helps to connect or disconnect tubing easily by manual, no special tools required.
Push-in Tubing O.D: 1/4"
Thread Size: M5 x 0.8
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT
Thread Material: Nickle Plated Brass
Thread Sealing: O-ring
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Thread Size: M5 x 0.8
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT
Thread Material: Nickle Plated Brass
Thread Sealing: O-ring
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡0.39
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PB Male Branch Tee