PD 06-02 | Push in Fitting - Male Run Tee Adapter | 6mm O.D Tubing, R, PT, BSPT 1/4 Male Thread
PD 06-02 pneumatic push in fitting (push to connect fitting) male run tee adapter is designed to connect two 6mm tubing at a 90-degree angle to a R, PT, BSPT 1/4 male threaded connection. This 6mm tubing x R, PT, BSPT 1/4 swivel T-shaped male fitting can be oriented 360 degree, allowing proper positioning of the fitting. PD 06-02 male tee fitting is used to combine or divide fluid flow through 6mm O.D PU, PE, Nylon or PVC tubing.
Push-in Tubing O.D: 6mm
Thread Size: R, PT, BSPT 1/4
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT
Thread Material: Nickle Plated Brass
Thread Sealing: Teflon
Seal, O-ring: NBR
Working Pressure: 0—1.0MPa | 0—150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0—60°C | 32—140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Thread Size: R, PT, BSPT 1/4
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT
Thread Material: Nickle Plated Brass
Thread Sealing: Teflon
Seal, O-ring: NBR
Working Pressure: 0—1.0MPa | 0—150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0—60°C | 32—140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡1.00
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PD Male Run Tee