PDF 04-M6 | Push in Fitting - Swivel Female Run Tee | 4mm O.D Tubing, M6 x 1.0 Female Thread
PDF 04-M6 pneumatic push in fitting (push to connect fitting) swivel female run tee is designed to connect two 4mm tubing at a 90-degree angle to a M6x1.0 female threaded connection. This 4mm tubing x M6 swivel T-shaped female fitting can be oriented 360 degree, allowing proper positioning of the fitting. PDF 04-M6 female tee fitting is used to combine or divide fluid flow through 4mm O.D PU, PE, Nylon or PVC tubing.
Push-in Tubing O.D: 4mm
Thread Size: M6 x 1.0
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT
Thread Material: Nickle Plated Brass
Seal, O-ring: NBR
Working Pressure: 0—1.0MPa | 0—150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0—60°C | 32—140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Thread Size: M6 x 1.0
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT
Thread Material: Nickle Plated Brass
Seal, O-ring: NBR
Working Pressure: 0—1.0MPa | 0—150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0—60°C | 32—140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡1.00
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PDF Female Run Tee