PE 06 | Push in Fitting - Union Tee | 6mm O.D Tubing x 6mm O.D Tubing
PE 06 union tee push in fitting is used to connect two 6mm tubing in straight line and one branch at a right angle from the middle of the tee with same diameter. 6mm O.D tubing x 6mm O.D tubing union tee connector push to connect fitting is made of strong thermoplastic (PBT) and stainless steel tube gripping claw. 6mm O.D tubing equal union tee push in fitting can easily insert or pull out the trachea without any tools.
Push-in Tubing O.D: 6mm
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡0.53
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PE Union Tee