PE 1/8 | Push in Fitting - Union Tee Connector | 1/8" O.D Tubing x 1/8" O.D Tubing
PE 1/8 union tee connector push in fitting is used to connect two 1/8" tubing in straight line and one branch at a right angle from the middle of the tee with same diameter. 1/8" O.D tubing x 1/8" O.D tubing union tee push to connect fitting is made of strong thermoplastic (PBT) and stainless steel tube gripping claw. 1/8" O.D tubing equal union tee push in fittings can easily insert or pull out the trachea without any tools.
Push-in Tubing O.D: 1/8"
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡0.43
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PE Union Tee