PE 5/32 | Push in Fitting - Union Tee | 5/32" O.D Tubing x 5/32" O.D Tubing
PE 5/32 union tee push in fitting is used to connect two 5/32" tubing in straight line and one branch at a right angle from the middle of the tee with same diameter. 5/32" O.D tubing x 5/32" O.D tubing union tee connector push to connect fitting is made of strong thermoplastic (PBT) and stainless steel tube gripping claw. 5/32" O.D tubing equal union tee push in fittings enable quick tubing connection and disconnection.
Push-in Tubing O.D: 5/32"
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡0.52
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PE Union Tee