PEG 12-08 | Push in Fitting - Tube Tee Reducer | 12mm O.D Tubing x 8mm O.D Tubing
PEG 12-08 tube tee reducer push in fitting is used to connect three tubing with size down in both 90° directions. The tubing size in the middle is smaller than the two inline tubing. 12mm O.D tubing x 8mm O.D tubing union tee reducer push to connect fitting is made of strong thermoplastic (PBT) and stainless steel tube gripping claw. 12mm O.D tubing x 8mm O.D tubing union tee connector reducer push in fittings allow for a fast and easy way to repeatedly connect and disconnect air or fluid lines.
Push-in Tubing O.D1: 12mm
Push-in Tubing O.D2: 8mm
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡0.83
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PEG Union Tee Reducer