PH 04-02 | Push in Fitting - Male Banjo | 4mm O.D Tubing, R, PT, BSPT 1/4 Male Thread
PH 04-02 male banjo push in fitting is used to connect a 4mm tubing connection a female R, PT, BSPT 1/4 thread at a right angle. 4mm O.D tubing to R, PT, BSPT 1/4 male banjo elbow push to connect fitting is made of nickel plated brass, strong thermoplastic (PBT), POM release sleeve and stainless steel tube gripping claw. Male banjo elbow swivel pneumatic fitting has hexagon head on the top allows tightening with a hexagon wrench in limited spaces. 4mm tubing to R, PT, BSPT 1/4 90 degree male banjo pneumatic fittings are convenient for sections of the system requiring frequent disconnection and reconnection.
Push-in Tubing O.D: 4mm
Thread Size: R, PT, BSPT 1/4
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: Nickel Plated Brass & PBT Plastic
Thread Material: Nickle Plated Brass
Thread Sealing: Teflon Coating
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Thread Size: R, PT, BSPT 1/4
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: Nickel Plated Brass & PBT Plastic
Thread Material: Nickle Plated Brass
Thread Sealing: Teflon Coating
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡0.55
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PH Male Banjo Elbow