PH 04-M6 | Push in Fitting - Universal Male Banjo | 4mm O.D Tubing, M6 x 1 Male Thread
PH 04-M6 universal male banjo push in fitting is used to connect a 4mm tubing connection a female M6 x 1 thread at a right angle. 4mm O.D tubing to M6 x 1 male banjo push to connect fitting is made of nickel plated brass, strong thermoplastic (PBT), POM release sleeve and stainless steel tube gripping claw. 4mm tubing to M6 x 1 male banjo elbow push in fitting has a NBR O-ring on the thread to provide safe sealing. Male banjo elbow swivel pneumatic fitting has hexagon head on the top allows tightening with a hexagon wrench in limited spaces.
Push-in Tubing O.D: 4mm
Thread Size: M6 x 1
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: Nickel Plated Brass & PBT Plastic
Thread Material: Nickle Plated Brass
Thread Sealing: O-ring
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Thread Size: M6 x 1
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: Nickel Plated Brass & PBT Plastic
Thread Material: Nickle Plated Brass
Thread Sealing: O-ring
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡0.42
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PH Male Banjo Elbow