PK 12 | Push in Fitting - Equal Branch Connector | 12mm O.D Tubing x 12mm O.D Tubing
PK 12 equal branch connector push in fitting is used to connect two 12mm tubing connections on both ends in straight line and three 12mm tubing on the branch with same diameter at right angles. 12mm O.D tubing x 12mm O.D tubing union branch push to connect fitting is made of strong thermoplastic (PBT), POM release sleeve and stainless steel tube gripping claws. 12mm O.D tubing equal union branch push in fitting allows tubing to be connected and reconnected repeatedly without damaging the tube or fitting.
Push-in Tubing O.D: 12mm
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡0.96
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PK Union Branch