PK 3/8 | Push in Fitting - Union Branch Connector | 3/8" O.D Tubing x 3/8" O.D Tubing
PK 3/8 union branch connector push in fitting is used to connect two 3/8" tubing connections on both ends in straight line and three 3/8" tubing on the branch with same diameter at right angles. 3/8" O.D tubing x 3/8" O.D tubing union branch push to connect fitting is made of strong thermoplastic (PBT), POM release sleeve and stainless steel tube gripping claws. 3/8" O.D tubing equal union branch push in fittings provide a leak-free means of easily connecting hoses in your compressed air system.
Push-in Tubing O.D: 3/8"
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡0.85
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PK Union Branch