PKG 06-04 | Push in Fitting - Union Branch Reducer | 6mm O.D Tubing x 4mm O.D Tubing
PKG 06-04 union branch reducer push in fitting is used for in-line distribution of air to three smaller diameter tubing connections at a right angle to the supply line. 6mm O.D tubing x 4mm O.D tubing union branch connector reducer push to connect fitting is made of strong thermoplastic (PBT) and stainless steel tube gripping claw. 6mm O.D tubing x 4mm O.D tubing branch union reducer push in fitting allows tubing to be connected and reconnected repeatedly without damaging the tube or fitting.
Push-in Tubing O.D1: 6mm
Push-in Tubing O.D2: 4mm
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡0.58
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PKG Union Branch Reducer