PL 04-M5 | Push in Fitting - Male Elbow | 4mm O.D Tubing, M5 x 0.8 Male Thread
PL 04-M5 push in pneumatic fitting (push to connect fitting) male elbow is designed for using to connect 4mm O.D tubing to M5 x 0.8 female threaded connection at a right angle. The swivel feature on the male stud end allows setting the tube connector where you want after tightening the thread. Pre-applied O-ring on M5 thread is ready to use without additional sealing. Quick and simple installation,designed for using to connect with polyethylene, nylon and PU tubing.
Push-in Tubing O.D: 4mm
Thread Size: M5 x 0.8
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT
Thread Material: Nickle Plated Brass
Thread Sealing: O-ring
Seal, O-ring: NBR
Working Pressure: 0—1.0MPa | 0—150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0—60°C | 32—140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Thread Size: M5 x 0.8
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT
Thread Material: Nickle Plated Brass
Thread Sealing: O-ring
Seal, O-ring: NBR
Working Pressure: 0—1.0MPa | 0—150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0—60°C | 32—140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡1.00
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PL Male Elbow