PL 08-01 | Push in Fitting - Male Elbow | 8mm O.D Tubing, R, PT, BSPT 1/8 Male Thread
PL 08-01 push in pneumatic fitting (push to connect fitting) male elbow is designed for using to connect 8mm O.D tubing to R, PT, BSPT 1/8 female threaded connection at a 90-degree angle. The swivel feature on the male stud end allows setting the tube connector where you want after tightening the thread. The male thread is nickel-plated brass and has pre-applied Teflon thread sealant. Quick and simple installation,designed for using to connect with polyethylene, nylon and PU tubing.
Push-in Tubing O.D: 8mm
Thread Size: R, PT, BSPT 1/8
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT
Thread Material: Nickle Plated Brass
Thread Sealing: Teflon
Seal, O-ring: NBR
Working Pressure: 0—1.0MPa | 0—150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0—60°C | 32—140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Thread Size: R, PT, BSPT 1/8
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT
Thread Material: Nickle Plated Brass
Thread Sealing: Teflon
Seal, O-ring: NBR
Working Pressure: 0—1.0MPa | 0—150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0—60°C | 32—140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡1.00
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PL Male Elbow