PLL 08-01 | Push in Fitting - Extended Male Stud Elbow | 8mm O.D Tubing, R, PT, BSPT 1/8 Male Thread
PLL 08-01 pneumatic push in fitting (push to connect fitting) extended male stud elbow connects 8mm O.D tubing to R, PT, BSPT 1/8 female threaded device at a 90 degree angle with a lengthen body. PLL 08-01 extended male elbow swivel is designed to be used in parallel with the standard male elbow. The extended height body allows the fitting to reach above other standard male elbows in limited space and prevents interference of the fittings.
Push-in Tubing O.D: 8mm
Thread Size: R, PT, BSPT 1/8
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT
Thread Material: Nickle Plated Brass
Thread Sealing: Teflon
Seal, O-ring: NBR
Working Pressure: 0—1.0MPa | 0—150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0—60°C | 32—140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Thread Size: R, PT, BSPT 1/8
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT
Thread Material: Nickle Plated Brass
Thread Sealing: Teflon
Seal, O-ring: NBR
Working Pressure: 0—1.0MPa | 0—150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0—60°C | 32—140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡1.00
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PLL Extended Male Elbow