PLM 16 | Push in Fitting Bulkhead Union Elbow | 16mm x 16mm O.D Tubing
PLM 16 pneumatic push in fitting (push to connect fitting) bulkhead union elbow is used to connect 16mm O.D tubing on both end through a panel or partition. The elbow design allows for a 90° change of tube direction. High quality PBT and brass body and brass thread with M24 locknut for resistance to corrosion. Round release sleeves allow the locknut and tubing to be removed easily.
Push-in Tubing O.D: 16mm
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT
Thread Material: Nickle Plated Brass
Seal, O-ring: NBR
Working Pressure: 0—1.0MPa | 0—150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0—60°C | 32—140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT
Thread Material: Nickle Plated Brass
Seal, O-ring: NBR
Working Pressure: 0—1.0MPa | 0—150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0—60°C | 32—140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡1.00
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PLM Bulkhead Union Elbow