PM 5/32 | Push in Fitting - Bulkhead Union Straight | 5/32" O.D Tubing x 5/32" O.D Tubing
PM 5/32 bulkhead union straight push in fitting is used to connect two 5/32" tubing on both ends through a panel or other barrier. Bulkhead union fitting is used when there is a need to move 5/32" tubing through some obstacle. Simply drill a hole, push one part of bulkhead through it, and then screw second part onto the other side. 5/32" O.D tubing x 5/32" O.D tubing bulkhead union push to connect fitting is made of nickel plated brass, POM release sleeve and stainless steel tube gripping claws. 5/32" O.D tubing equal bulkhead union push in fittings can easily insert or pull out the trachea without any tools.
Push-in Tubing O.D: 5/32"
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡0.56
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PM Bulkhead Union