PVG 5/16-1/4 | Push in Fitting - Union Elbow Reducer | 5/16" O.D Tubing x 1/4" O.D Tubing
PVG 5/16-1/4 union elbow reducer push in fitting is used to connect two tubing with different tubing diameter on the both ends at a right angle. 5/16" O.D tubing x 1/4" O.D tubing union elbow connector reducer push to connect fitting is made of strong thermoplastic (PBT) and stainless steel tube gripping claw. 5/16" O.D tubing x 1/4" O.D tubing 90 degree union elbow reducer push in fitting is widely used in industries automatic production equipment like machinery, electronics, automobile, packaging and medical.
Push-in Tubing O.D1: 5/16"
Push-in Tubing O.D2: 1/4"
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡0.63
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PVG Union Elbow Reducer