PZA 10 | Push in Fitting - Union Cross Connector | 10mm O.D Tubing x 10mm O.D Tubing
PZA 10 union cross connector push in fitting is used to connect four 10mm tubing with same diameter at right angles. 10mm O.D tubing x 10mm O.D tubing union cross push to connect fitting is popular choice whenever there is a need to split compressed air flow into every other direction. 10mm O.D tubing equal union cross push in fitting allows tubing to be connected and reconnected repeatedly without damaging the tube or fitting.
Push-in Tubing O.D: 10mm
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡0.75
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PZA Union Cross