PZA 12 | Push in Fitting - Equal Cross Connector | 12mm O.D Tubing x 12mm O.D Tubing
PZA 12 equal cross connector push in fitting is used to connect four 12mm tubing with same diameter at right angles. 12mm O.D tubing x 12mm O.D tubing union cross push to connect fitting is popular choice whenever there is a need to split compressed air flow into every other direction. 12mm O.D tubing union cross connector push in fittings are mainly used for quick connector piping, which can achieve line connected or disconnected without other tools easily.
Push-in Tubing O.D: 12mm
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡0.86
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PZA Union Cross