PZA 16 | Push in Fitting - Composite Union Cross | 16mm O.D Tubing x 16mm O.D Tubing
PZA 16 composite union cross push in fitting is used to connect four 16mm tubing with same diameter at right angles. 16mm O.D tubing x 16mm O.D tubing union cross push to connect fitting is popular choice whenever there is a need to split compressed air flow into every other direction. 16mm O.D tubing union cross connector push in fitting creates a simple and secure connection without any soldering, crimping or joining materials.
Push-in Tubing O.D: 16mm
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡1.23
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PZA Union Cross