PZA 3/8 | Push in Fitting - Union Cross Connector | 3/8" O.D Tubing x 3/8" O.D Tubing
PZA 3/8 union cross connector push in fitting is used to connect four 3/8" tubing with same diameter at right angles. 3/8" O.D tubing x 3/8" O.D tubing union cross push to connect fitting is popular choice whenever there is a need to split compressed air flow into every other direction. 3/8" O.D tubing equal union cross push in fitting allows tubing to be connected and reconnected repeatedly without damaging the tube or fitting.
Push-in Tubing O.D: 3/8"
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡0.67
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PZA Union Cross