SJSC 12-N03 | Speed Controller - Stainless Steel Push to Connect Fitting | 12mm O.D Tubing, 3/8 NPT Male Thread
SJSC 12-N03 speed controller stainless steel push to connect fitting is used to connect a 12mm tubing connection a female 3/8 NPT thread at a right angle, provides accurate flow regulation for precise speed control of pneumatic cylinders as well as gas flow in environments with high temperature, mechanical or chemical constraints. 12mm O.D tubing x 3/8 NPT flow control regulator stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM sealing material for chemical-resistance. 12mm O.D tubing x 3/8 NPT flow control valve stainless steel fittings have been designed and manufactured to be fully resistant to all types of corrosive materials and environmental factors. Control-out and control-in flow control valves are available.
Thread Size: 3/8 NPT
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Seal, O-ring: FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing ...