SPC 1/4-M5 | Male Stud Straight - Stainless Steel Push in Fitting | 1/4" O.D Tubing, M5 x 0.8 Male Thread
SPC 1/4-M5 male stud straight stainless steel push in fitting is used to connect a female M5 x 0.8 thread to a 1/4" O.D tubing in the same direction. 1/4" tubing x M5 male straight stainless steel push to connect fitting has an FKM (Viton) o-ring on the thread to provide safe sealing. 1/4" tubing x M5 male connector stainless steel pneumatic fitting is made of 316 stainless steel for corrosion resistance, FKM o-ring for chemical-resistance. External tightening with a flat wrench.
Push-in Tubing O.D: 1/4"
Thread Size: M5 x 0.8
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Thread Sealing: O-ring
Seal, O-ring:FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing ...
Thread Size: M5 x 0.8
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Thread Sealing: O-ring
Seal, O-ring:FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing ...
Price: ￡1.96