SPE 10 | Equal Tee Connector - Stainless Steel Push in Fitting | 10mm O.D Tubing x 10mm O.D Tubing
SPE 10 equal tee connector stainless steel push in fitting is used to connect two 10mm tubing in straight line and one branch at a right angle from the middle of the tee with same diameter. 10mm O.D tubing x 10mm O.D tubing union tee connector stainless steel push to connect fitting is made of 316 stainless steel for corrosion resistance, FKM seal for chemical-resistance. 10mm O.D tubing equal tee stainless steel pneumatic fitting is designed to withstand corrosive environments (substances), to channel aggressive fluids and to be used in the food, pharmaceutical and chemical industries, as well as extreme hot and cold conditions.
Push-in Tubing O.D: 10mm
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316 Stainless Steel
Seal, O-ring: FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing ...
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316 Stainless Steel
Seal, O-ring: FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing ...
Price: ￡8.56