SPL 04-M6 | Male Swivel Elbow - Stainless Steel Push in Fitting | 4mm O.D Tubing, M6 x 1.0 Male Thread
SPL 04-M6 male swivel elbow stainless steel push in fitting is used to connect 4mm O.D tubing to M6 x 1 female threaded connection at a 90 degree angle. This 4mm O.D tubing x M6 male elbow stainless steel push to connect fitting is composed entirely of 316 stainless steel and incorporate FKM (Viton), withstanding corrosive environments and aggressive fluids. The swivel feature on the male stud end allows setting the tube connector where you want after tightening the thread. Pre-applied O-ring on M6 thread is ready to use without additional sealing.
Push-in Tubing O.D: 4mm
Thread Size: M6 x 1.0
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Seal, O-ring: FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing ...
Thread Size: M6 x 1.0
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Seal, O-ring: FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing ...
Price: ￡3.65