SPM 10 | Equal Bulkhead Union - Stainless Steel Push in Fitting | 10mm O.D Tubing x 10mm O.D Tubing
SPM 10 equal bulkhead union stainless steel push in fitting is used to connect two 10mm tubing on both ends through a panel or other barrier. Bulkhead union fitting is used when there is a need to move 10mm tubing through some obstacle. Simply drill a hole, push one part of bulkhead through it, and then screw second part onto the other side. 10mm O.D tubing x 10mm O.D tubing bulkhead union straight stainless steel push to connect fitting is made of 316 stainless steel for corrosion resistance, FKM seal for chemical-resistance. 10mm O.D tubing bulkhead union stainless steel fitting is suitable for use with nylon, polyethylene, and polyurethane tubing in air, water, and oil applications.
Push-in Tubing O.D: 10mm
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316 Stainless Steel
Seal, O-ring: FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing ...
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316 Stainless Steel
Seal, O-ring: FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing ...
Price: ￡7.12